Operating instructions Ground Optimizer GO 1 and GO2 Ultra as well as GO3 Ultra
Congratulations on purchasing your Vortex HiFi Ground Optimizer!
You have acquired one of the most innovative hi-fi products ever. The Ground Optimizer combines building biology know-how; High-tech Shielding technology with the latest knowledge of influencing musical perception and human Nervous system by electrosmog.
The Ground Optimizer is our 1st product, which directly eliminates the cause of bad sound - namely the interference on the device ground. A clean ground cannot provoke signal errors, it cannot cause interference with other ground disturbances of connected devices, it cannot produce fields which create disturbances inside and outside of devices and cables.
The above measurement shows the extreme effect of the Vortex HiFi Ground Optimizer. The upper (blue) curve shows mass disturbances up to 10 times the value compared to the measurement with the Ground Optimizer lower (yellow) curve. The interference is here broadband reduced by approx. 50%. The measurement spectrum shown corresponds to this "Dirty Power" - Spectrum which is viewed as particularly critical for humans in environmental medicine.
If the disturbances on the ground are eliminated, they cannot be emitted either! This is impressively demonstrated by the two 3 × 3 matrix measurements of the E-field with a high-end 3D E-field measuring probe. Figure 1 shows the measurement in front of a hi-fi system (X-axis).
The measuring points 1 (36,6 V / m) and 7 (33,4 V / m) are in front of the loudspeakers. These are connected to the system and therefore radiate the system's mass disturbances. The measuring point 4 (52,9 V / m) is in front of the hi-fi system. The measuring point 6 (1,7 V / m) represents the field at the seat.
Figure 2 now shows the measurement with Ground Optimizer GO1 only.
The fields have all decreased by approx. 95% and are now below the guidelines for VDU workstations at the seat.
A disturbance that no longer exists, cannot be disturbed and emitted! This protects the human nervous and hearing systems. In this way, the imagination and thus the corrective ability of your hearing system are preserved to the maximum. The music just feels right to you. They perceive music as life, stress-free, rich in detail and three-dimensional.
The Ground Optimizer is available in 2 qualities: the Standard Ground Optimizer GO1 with a galvanic high-speed isolator with 7.000 V / µsec in AIO technology, Nano Shield Insert the device plug and the angle brass contact. The second is the Ultra Ground Optimizer GO2 with an ultra-fast galvanic isolator with 51.000 V / µsec in PI technology, Nano Shield shielding on the device and on the power plug. The power plug is also extremely damped and has contacts coated with rhodium or gold. The application of both Ground Optimizer qualities is the same.
Connect the Ground Optimizer correctly
There is actually no such thing as a Ground Optimizer, strictly speaking there are 7 different ones! The actual annihilation of the disturbances takes place in a circuit in the mains plug of the Ground Optimizer. The connection to the device that is to be suppressed is made via a plug through which the connection to the Mass of the device is produced. A free socket must be available for this, which contact to the Mass has not been galvanically isolated! But this is highly individual. Therefore there are 7 Ground Optimizer variants with 5 different device plugs.
- Ground Optimizer - RCA Cinch: For ground contact to analog circuits, video interfaces and not galvanically separated electrical S / PDIF inputs and outputs.
- Ground Optimizer - cable lug: For ground contact to the ground of the loudspeaker output on the power amplifier (if mass = minus!).
- Ground Optimizer - USB A: For all USB A interfaces.
- Ground Optimizer - USB B: For all USB B interfaces.
- Ground Optimizer - RJ45 (LAN): For ground contact via LAN interface.
- Ground Optimizer - XLR M: With XLR M (male) connector for female XLR interfaces.
- Ground Optimizer - XLR F: With XLR F (female) connector for male interfaces.
A ground optimizer can do a lot. But if you use a Ground Optimizer wherever interference occurs on the ground, there are practically no sound-disturbing equalizing currents (eddy currents) via the connecting cables and radiated fields.
This results in an extremely holographic and incredibly detailed reproduction.
Which ground optimizer for which device - THE MATRIX
Initial deterioration
The cables are highly informed and activated. Information is basically known from homeopathic medicine. This information / structures change the interfaces in order to reduce disturbances to the human nervous system. We measure this with an HRV EKG. When reforming (informing) these interfaces, there is initially a deterioration. During this time, the sound can sound inharmonious, undifferentiated to dull and is constantly changing. So give the interfaces time! The roughest should be finished after an hour. Very good results appear after 72 hours. This transformation is completed after approx. 6 weeks (see Vortex HiFi test listening experience).
Your Vortex HiFi Sound Team
