Thank you for purchasing the Oscillation Alignement Card. You have acquired one of the most innovative products in the wellness and hi-fi sector.

Goal:

The aim of the Oscillation Alignement Card is to eliminate the extremely negative effects of electromagnetic waves on the human organism and, in particular, on internal communication. Kinesiological tests as well as strength and coordination tests show the enormous influence of the oscillation alignment card on the organism as well as on internal communication. See videos below

Application:

Basic application:

A: For devices with a power connection, the card is glued to the power plug (or cable) that goes into the device. To do this, use the adhesive pads supplied.

B: For devices in battery operation, stick the card to the bottom of the device, as close as possible to the battery. There is no direction to consider on the map.

Phone: With a cell phone, place the OA card between the case and the cell phone.
Tablet: With a tablet computer, attach the OA card to the back with the adhesive pads, ideally where the batteries are installed.
Laptop: In the case of a laptop (battery operation), attach the OA card with the adhesive pads on the underside, ideally where the batteries are installed.
eReader: See tablet
DECT telephone: You shouldn't actually use a DECT phone at all, as this is more critical than a cell phone. The OA card probably does not fit on the handpiece. Attach the OA card to the power plug that goes into the transmitter station. This will suppress the handset via the signal connection. But check whether you can do without a DECT telephone entirely and only make calls using your mobile phone. Some telephone systems allow cell phones to be integrated into the telephone system via WLAN.
repeaters: Repeaters of all kinds are usually plugged in. directly in a wall socket. Here you place the OA card on the back between the repeater and the socket / wall.
DLAN / Powerlan: Proceed in the same way as with the repeater for all devices that establish a LAN transmission via the mains.
Router: As with all devices with a power connection, stick the OA card on the incoming power cable.
Devices with LAN / WLAN: All devices with LAN and especially with WLAN should receive an OA card. These can be TV sets, smart meters, but also smart controllers. As with all devices with a power connection, the OA card is glued to the incoming power cable.
Keyboards: Computer keyboards, whether wireless or wired, emit critical radiation. Here the OA card is glued under the keyboard.

If you have any questions, our dealers will be happy to help you develop a holistic concept for a trouble-free environment.
You can find the addresses at https://das.raumtuning.info/?page_id=1831

Email: info@vortexhifi.com

Oscillation Alignement Card videos