Vibration Naturalizer device feet from Vortex HiFi

Vibration Naturalizer device feet from Vortex HiFi

Comments 0 comments

"Great astonishment and again the realization that you openly know what you are doing ..."

This video from the series short and simple explains the most important properties and the application of the Vortex HiFi device feet.

We are pleased to present our device feet, loudspeaker feet and cable lifters in Vibration Naturalizer technology. We have completely rethought the “device feet” and merged them with our knowledge of dirty power and vibrations. The result is unique sound art works that even real music professionals will be amazed at.

A real music professional, like the brass instrument maker and qualified musician Thomas Krüger from - The other hi-fi studio - writes about his 1st encounter with the Vortex HiFi feet:

“Hello Mr. Maurer, I just got feet and tried them out. What can I say? Great astonishment and again the realization that you openly know what you are doing. "

The Vortex HiFi device feet differ fundamentally from all device feet on the market. Read the 10 basic advantages over all other device feet:

1. Vortex HiFi device feet are different - they are based on environmental medicine, biological knowledge.

2. You are not trying to make the devices vibrate less, but more naturally.

3. To do this, the feet use a 3-way stand, which avoids interference between the feet by means of differently coupled feet.

Triple stand with specialized feet.

4. For the perfect coupling between the foot and the base of the device, the feet use a technology such as that used in the ultrasonic analysis of workpieces - impedance matching using sapphires.

The sapphire adjusts the impedance between the base of the device and the block of wood.

5. Resonances are prevented by a naturally grown, special maple block, but also by targeted small and large holes.

Large, central and small bores at the sound inlets prevent resonances.

6. Through the vibration-optimized attachment of 5mm felt feet, the influence of the subsurface was largely avoided and the wooden block was not deprived of its natural vibration, as no surface was completely in contact.

The special felt feet reduce the structure-borne noise from the rack extremely.
The measurement shows the extreme attenuation of structure-borne noise with the Vortex HiFi VN45DB device foot (black) compared to the original device feet (red)

7. Selected woods and individual processing of the individual vibrating bodies (wooden blanks) by hand make it possible to get the maximum sound out of every workpiece.

8. The wooden construction made of selected woods neither generate eddy currents nor do they deform the magnetic or electrical field of the devices.

9. The optimized height of the device feet enables a clearly minimized field strength with which the device fields penetrate the rack floor and thus the device feet reduce the formation of potential vortices that can damage the sound.

The 3 measurements below show the basic differences in field strength depending on the distance from the bottom of the device and the device feet used.

The measuring head rests directly on the housing. This is the situation with cheap housings such as Apple TV, AMAZON FIRE TV, satellite receivers, etc. The field strength here is outside the measuring range (overflow) - over 1100 volts / meter! This is extremely bad for the sound, but also for the picture.
E-field measurement with a metal device base 834 volts / meter
Another drastic reduction in the electrical field strength by more than 300 volts / meter using the VN45DB device foot to 529 volts / meter compared to flat metal feet.

10. Thanks to Vortex HiFi's own stress relief and interference suppression information, a stress-free listening experience that is unique.

Read the test report in the ad-free listening experience by Marco Kolks

Download (PDF, 235KB)

Read all the details here:

Post a comment